Transducer A609S-RB (5.0MHz) Panametrics

Description

Description
Transducer A609S-RB (5.0MHz) Panametrics
A609S-RB converter with replaceable working surface protectors
Converters with replaceable working protectors
surfaces are straight aligned
contact transducers of longitudinal wave, which
can be used with delay line, protective
membrane or wear-resistant protective cap.
Benefits:
1. Provide versatility due to
installation of a replaceable delay line, wear-resistant
protective cap or protective membrane
2. When the inverter is used alone (without
installation of the above protectors), epoxy
wear-resistant surface provides good
acoustic impedance corresponding to impedance
plastics, most composites and others
materials with low acoustic impedance
3. The thread on the transmitter housing provides
simple connection of the delay line, protective
membrane and wear-resistant protective cap
Areas of use:
1. Detection of defects by a direct beam
2. Thickness measurement
3. Control of objects with high temperature
4. Inspection of sheets, billets, bars and forgings
Standard converters
* Special attachments provide more comfortable
holding the transducer with a gloved hand
* Standard connector is 90 ° BNC (RB), can
be installed straight BNC connector (SB)
* The transducer is supplied separately from the line
delay, protective membrane and wear-resistant
protective cap
The size of the piezoelectric element is 13 mm.
Frequency MHz 5.0