Olympus Panametrics OmniScan SX PA 16:64 Ultrasonic Flaw Detector Phased Array

Description

ebay template
The Following Items Are Included:
Olympus OmniScan SX 16:64 PA Ultrasonic Flaw Detector (BC# -L/T*)
Battery Pack
AC Adapter/Charger
Power Cord
User Manual On Cd-ROM
Carrying Case (G)
BE SURE TO CHECK OUR EBAY STORE FOR OTHER ITEMS!
This Item Has A Current Calibration!
Olympus OmniScan SX 16:64 PA Ultrasonic Flaw Detector
Designed to perform nondestructive inspections of industrial and commercial materials
Includes Carrying Case & Accessories As Listed Above!
Working Condition: Excellent
Condition: Refurbished
Calibrated: Yes
Warranty: 1 YEAR WARRANTY
Olympus OmniScan SX Ultrasonic Flaw Detector
The Lightest and Most User-Friendly OmniScan
Olympus is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.
The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan.
Setup
Inspection setup can be performed in NDT SetupBuilder, and imported directly, via SD card or USB key, to the OmniScan SX. Then, only a few basic operations are required in the instrument, such as setting the gate and range, before acquisition can begin. It is also very easy to create a setup right in the OmniScan SX, thanks to the following features:
Automatic probe recognition.
One-step, preconfigured application Wizard.
Weld Overlay and RayTracing simulation
Calibration
To achieve a code-compliant inspection, the Calibration Wizard ensures that every focal law in every group is the direct equivalent of a single-channel conventional flaw detector. The user is guided step-by-step through the required calibrations, including Velocity, Wedge Delay, Sensitivity, TCG, DAC, AWS, and encoder calibrations. Now, TOFD PCS calibration and lateral wave straightening can be performed automatically.
Acquisition
The OmniScan SX enables easy configuration of inspection parameters for either manual, one-line, or raster encoded scans. The acquisition is displayed in real time through user-selectable views and offers the ability to store data on a hot-swappable SD card or USB 2.0 device.
Intelligent layouts
Full-screen mode for better visualization of defects
Synchronization and measurements can be processed using different gate combinations
Data Analysis and Reporting
Data, reference, and measurement cursors for defect sizing
Extensive readings database and predefined lists for trigonometry, flaw statistics on axes, volumetric position information, code-based acceptance criteria, corrosion mapping statistics, and more
Views are linked for interactive analysis and automatically updated when performing off-line gate repositioning
Optimized preconfigured layouts for quick and simple length, depth, and height sizing of flaws
Whether you prefer performing data analysis on a computer or simply wish to maximize the time your OmniScan is at work in the field, OmniPC or TomoView are the perfect software companions for your OmniScan.
Affordable and Portable Go a Long Way….
The Omniscan® SX provides Olympus with a new and versatile tool to add to its arsenal of innovative and creative complete market solutions aimed at simplifying your workflow and improving overall productivity.
Phased Array Weld Inspection
The OmniScan PA is at the heart of the manual and semiautomated phased array weld inspection solutions developed by Olympus for the oil and gas industry. These systems can be used for inspection in compliance with ASME, API, and other code criteria, while offering highspeed detection capabilities, and facilitating indication interpretation.
Corrosion Mapping and Composite Inspection
Zero-degree inspection just became even more accessible with the arrival of the OmniScan SX. For corrosion or composite inspection, Olympus offers field-proven solutions for detection of anomalies or wall loss.
TOFD Weld Inspection
TOFD is an easy and efficient approach for primary detection of weld defects. It is quick, cost-effective and capable of sizing defects present in the volume of the weld, a problematic area for manufacturing defects.
Component Inspection
Using ultrasonic techniques, inspection of components can detect cracks, wall loss, and other damage. With the capacity for both angle and linear zero-degree beams, the OmniScan SX is a very cost-efficient solution for this type of single-group inspection.
Features:
Cost-efficient, single-group
Two-axis encoding and data archiving capacity
Conventional UT, TOFD, and 16:64PR PA capabilities
8.4 in. (21.3 cm) touch screen with OmniScan interface
Compact, lightweight design
Specifications:
Housing
Overall dimensions (W x H x D)
267 mm × 208 mm × 94 mm (10.5 in. × 8.2 in. × 3.7 in.)
Weight
3.4 kg (7.5 lb) with battery
Data Storage
Storage devices
SDHC card or most standard USB storage devices
Data file size
300 MB
I/O Lines
Encoder
2-axis encoder line (quadrature, up, down, or clock/ direction)
Digital input
4 digital TTL inputs, 5 V
Digital output
3 digital outputs TTL, 5 V, 15 mA maximum per output
Acquisition on/off switch
Yes, through configuration of a digital input
Power output line
5 V, 500 mA power output line (short-circuit protected)
Pace input
5 V TTL pace input
Display
Display size
21.3 cm (8.4 in.) (diagonal)
Resolution
800 pixels x 600 pixels
Brightness
600 cd/m2
Viewing angles
Horizontal: –80° to 80° Vertical: –60° to 80°
Number of colors
16 million
Type
TFT LCD
Power Supply
Battery type
Smart Li-ion battery
Number of batteries
1
Battery life
Minimum 6 hours under normal operating conditions
Environmental Specifications
Operating temperature range
-10 °C to 45 °C (14 ºF to 113 ºF)
Storage temperature range
–20 °C to 60 °C (–4 ºF to 140 ºF) with battery
–20 °C to 70 °C (–4 ºF to 158 ºF) without battery
Relative humidity
Max. 70% RH at 45°C noncondensing
Ingress protection rating
Designed to meet requirements of IP66
Shockproof rating
Drop-tested according to MIL-STD-810G 516.6
Ultrasound Specifications
Connectors
1 Phased Array connector: Olympus PA connector
2 UT connectors: LEMO 00
Number of focal laws
256
Probe recognition
Automatic probe recognition
Pulser/Receiver
Aperture
16 elements
Number of elements
64 elements
Pulser
Voltage
40 V, 80 V, and 115 V
Pulse width
Adjustable from 30 ns to 500 ns; resolution of 2.5 ns
Pulse shape
Negative square wave
Output impedance
35 Ω (pulse-echo mode); 30 Ω (pitch- catch mode)
Receiver
Gain
0 dB to 80 dB, maximum input signal 550 mVp-p (full-screen height)
Input impedance
60 Ω (pulse-echo mode); 150 Ω (pitch- catch mode)
System bandwidth
0.6 MHz to 18 MHz (–3 dB)
Beamforming
Scan type
Sectorial or linear
Group quantity
1
Data Acquisition
Digitizing frequency
400 MHz (12 bits) after interpolation per 5/4
Maximum pulsing rate
Up to 6 kHz (C-scan)
Data Processing
Number of data points
Up to 8,192
Real-time averaging
PA: 2, 4, 8, 16
Rectifier
RF, full wave, half wave +, half wave –
Filtering
3 low-pass, 3 band-pass, and 5 high-pass filters
Video filtering
Smoothing (adjusted to probe frequency range)
Data Visualization
A-scan refresh rate
A-scan: 60 Hz; S-scan: 60 Hz
Data Synchronization
On internal clock
1 Hz to 6 kHz
On encoder
On 2 axes: from 1 to 65,536 steps
Programmable Time-Corrected Gain (TCG)
Number of points
16: One TCG (time-corrected gain) curve per focal law
Maximum slope
40 dB/10 ns
Alarms
Number of alarms
3
Conditions
Any logical combination of gates
For full Olympus OMNIScan SX Ultrasonic Flaw Detector product specifications, please click here:
Olympus OMNIScan SX
Please check our Huge Inventory with savings of up to 80% off of retail on Cat5/5e/6 LAN Cable Certifiers and Fiber Optic OTDR's, Fusion Splicers, CATV Meters, Fiber Optic Kits, Sources, Meters, Tools, Network Analyzers and much more. Here is a Link to our
Ebay Test Equipment Store
. All of our Test Equipment is backed with a Full Warranty and unbeatable customer support & service. Please don't hesitate to
contact us
for a Quote on Something you don't see in our inventory, sometimes we have items that may have not been listed or processed yet.
Test Equipment Store Offers a wide range of Refurbished Telecom/ Datacom Tools and Test Measurement Equipment. Which includes Fiber Optic Test and Splicing tools, Fusion Splicers, OTDRs, Copper and Fiber Cable Certifiers, CATV Test Equipment, Cable and Antenna Analyzers, Network Analyzers and much more!
We carry a large inventory of quality refurbished and used test equipment from all the major manufacturers. If you are looking for multiple quantities or if we don't have a listing for a particular item that you are looking for. Please contact us as it may be fresh inventory waiting to be listed or we'll be glad to find it for you at the best price possible and put up an eBay listing for you!
We Ship World Wide!
We will attempt to ship your item(s) within 24 hours after payment has been received. To get a real-time shipping quote to your destination, enter your country and zip / postal code information into the shipping calculator and click "Get Rate".
Many countries impose their own customs, duties, tariffs, taxes, etc. on items being shipped from a foreign country. We do not cover those cost's and we recommend that you contact your countries customs agency for that information.
We Offer Multiple Quantity Price & Shipping Discounts, Email Us If You Are Interested In Larger Quantities.
We accept credit card payment transactions via the online checkout system! The checkout process is designed so that it communicates with the merchant to confirm that payment has been made and cleared. Other methods of payment are outlined through the online checkout process. Winning bidders must contact us within 3 days after auction close if special payment arrangements are needed.
Your payment is expected within 5 days after the auction close. Unpaid auctions will be forfeited after 5 days of the auction close and the Item(s) will be relisted for sale.
Items will be shipped within 24 hours (1 Business Day) upon receipt of payment from the winning bidder. (Certain orders may take longer for processing due to comprehensive final service inspections)
A Shipment Tracking number(s) will be provided to inform Buyers of their expected ETA (Estimated Time of Arrival). Tracking number(s) will be provided the same day as order shipment.
Thank you
ALL MAJOR CREDIT CARDS & PayPal ACCEPTED
Sell Smarter with
Kyozou
.
Inventory and Ecommerce Management