NOVOTEST NDT Coating Thickness Gauge TP-1M, with probe

Description

THIS LISTING IS FOR
ONE
TP-1M COATING THICKNESS GAUGE
If you have any questions, contact
us
.
(Free shipping for continental USA only, additional cost apply for international shipping)
SHIPS FROM FL, USA
Includes:
Thickness gauge electronic unit TP-1M
Probe – 1 pc
Set of reference thickness samples
Batteries (AA) – 2 pcs
Charger
Operating manual
Case
Coating Thickness Gauge NOVOTEST TP-1M
Portable Coating Thickness Gauge NOVOTEST TP-1M – device for operative non-destructive measuring of coating thickness in compliance with ISO 2808 with high measurement accuracy.
Coating thickness gauge is designed to test:
thickness of various thick protective coatings on various metals and alloys;
thickness of paint and other dielectrics – radio-absorbing, mastic, teflon, plastic, electroplating coatings on steel;
thickness of electroplating and paint coatings on non-ferromagnetic alloys and non-ferrous metals;
thickness of bitumen and other thick coatings on various metals and alloys;
as well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness
Electronic thickness gauge – device which widely used in shipbuilding and automotive industries for measuring of the thickness of paint, in order to test the quality of products, also it used for determining technical condition of the tested objects.
Thickness measurement range(depends on probe type)
0 µm … 60 mm
Dimensions, mm
122x65x23
Operating temperature range, ° C
-5 … +40 ° C
Batteries
2 AAA
Type of connectors of probes
Lemo
Time of continuous work hours, not less
20
Weight of electronic unit with batteries, no more, kg
0.2
Specifications of probes for Coating Thickness Gauge NOVOTEST TP-1M
Coatings on steel (dielectric and conductive
coatings on ferromagnetic metals and alloys)
Type of probe
Coating thickness measurement range
Measurement accuracy
Dimensions of the probe, mm
probe F-0,3
0-300 μm
± (3% ± 1 μm)
Ø5×40
probe F-0,5
0-500 μm
± (3% ± 1 μm)
Ø 7×14
probe F-2
0-2000 μm
± (3% ± 2 μm)
Ø 9×35
probe F-5
0-5000 μm
± (3% ± 2 μm)
Ø 18×35
Coating on the non-magnetic metals
(Dielectric coatings on non-ferrous metals and alloys)
probe NF-0,5
0-500 μm
± (3% ± 2 μm)
Ø 12×35
probe NF-2
0-2000 μm
± (3% ± 2 μm)
Ø 12×35
Thick coatings on metals (dielectric coatings on metals)
probe M-12
0-12 mm
± (3% + 0.002 mm)
Ø 15×50
probe M-30
1-30 mm
± (3% + 0.003 mm)
Ø 40×50
probe M-60
1-60 mm
± (3% + 0.005 mm)
Ø 70×60
Measurement of surface roughness, Rz
(After abrasive blasting pre-painting work)
probe DSH
2-360 μm
± (3% ± 2 μm)
Ø 12×45
Temperature, humidity and dew point
probe DT
-50 … +125 ° C
+ / – 1 ° C
Ø 15×45
probe DTVR
Humidity: 0 – 100%
Temperature: -50 … 125 °C
Dew point: -15 – +40 °C
± 5%
± 1 ° C
± 2 ° C
Ø 15×120