Meriam Process Technologies MFT-4010-11-1-01 HART Modular Calibrator - NDT Multi

Description

Meriam Technologies MFT-4010 Modular Calibrator
Stock #180912A
Included with Sale
-MFT4010 Unit
-Hard Padded Transport Case
-Protective Boot for Unit
-0-1500 PSIG Module
-H 0-400" H2O Module
-RTD Measure/Simulate Module
-Test Leads/Fittings for Modules
-'AA' Battery Pack
Specifications:
Modular Calibrator with HART Communicator
The MFT 4010 is a break-through combination calibrator / HART communicator that truly reduces the time spent on field calibrations. The MFT 4010 Series delivers the versatility of a calibrator and the convenience of HART communications in one handheld unit. Users can view up to four measurements simultaneously on the high resolution LCD or compare HART PV and AO values to corresponding values measured by the NIST traceable MFT.
Documentation of calibration results and HART configurations is standard.
Available modules include differential, gauge, vacuum and absolute pressure as well as temperature, and voltage/current. A voltage and current meter is integral to the base unit. All HART field devices can be configured, polled, and trimmed using HART communications. Device Specific commands for supported devices are included with the MFT.
All-In-One Tool
– Takes the place of multiple handheld instruments, simplifies workload and improves productivity.
Automation for HART Field Devices
- Calibration is automated through auto setup of the calibrator based on the device settings;  digital trims automate the device adjustment steps.
Calibration Types Supported
– Pressure, t/c, RTD, I/P, P/I, Switch, Loop and mA/V for conventional or HART transmitter or local indicators.
Document As found and As left Calibration Results
– Create calibration procedures on the handheld or download them from compatible device management software.  Save results to non-volatile memory.
Field Updates
– Uses Internet downloads to update and add capability / HART support Modules – Select from a variety of positive-lock measurement modules for excellent versatility.
Field Recertification
– Sensor modules and integral V / I can be recalibrated for zero, span, & linearity via the MFT.
User Interface
– 2.1” x 2.1” display, four soft keys (definitions change with mode  requirements) and eight hard keys provide user interface. Display is configurable for 1 to 4 simultaneous measurements.
User Convenience
– Auto shut off, Damping, Min/Max value capture, display Hold, sensor Zero, direct Contrast adjustment.
Security Lockout
– Lockout specific MFT settings or all at one time.
Diagnostics
– MFT 4010 self-tests upon power up and upon installation of sensor modules. Advisories are posted on the display.
Dedicated DOF Memory
– Memory for 500 HART device drivers.
Models & Descriptions:
MFT 4000 Calibrator – Base unit for calibration work with selected NIST traceable sensor modules & integral voltage/current meter.  Documenting included.
MFT 4005 Calibrator with HART® Trims – MFT 4000 with HART support limited to analog and digital trims for calibration support.  Documenting included.
MFT 4010 Calibrator with HART®
(model for sale)
– Base unit for modules and full Device Specific HART communications. Quick Cal displays HART PV and AO along with MFT’s NIST traceable measurements. User can identify needed trim(s) and access the trim function(s) from same display. Smart Trim allows selection of analog or digital trims without navigating through menu trees. Documenting included.
Technical Specifications:
Base Unit 9.00”L x 4.70”W x 3.58”D ABS plastic case with shock absorbing boot, 28 oz, three bays for measurement modules.
Keypad Overlay kepad with 10 dome contact style buttons and 4 soft keys. Alpha entry based on LCD alpha matrix; numeric entry with buttons.
Display 128 x 128 pixel graphic display, 2.1” x 2.1” viewable area, 5-digit resolution
Power 6 AA alkaline or NiMH batteries, optional 100 – 240 Vac power adapter
Connections Standard banana jacks (3⁄4” center) for ±50 mA/Volts DC and for HART
Data Transfer DB-9 for RS-232C
Certifications CE Approval. Intrinsically Safe, Class I, Div I areas per CSA 22.2 & UL 913 by MET Laboratories
Temperature Specifications Storage: -40° F to 140° F (-40° C to 60° C) Operating: 23° F to 122° F (-5° C to 50° C)
NIST Traceable Accuracy Current / Voltage: ± 0.025% of F.S. ± 0.001% of Span per ° F (ref. temp. 70° F).
Modules 2.3”L x 1.3”W x 2.6”D, 8.3 ozs or less. Positive-lock with spring latch. Depress latch to release. Electrical connections are PC board contacts to spring loaded receivers on base unit. Blank inserts protect any empty bay(s).
Trade Ins:
We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request.
Payment terms:
We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to .000).  Businesses and Universities, please call for payment options.  Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them.
International Buyers:
We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.
Shipping Terms:
Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country.
* Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.
* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.
* Your phone number is required for shipping purposes, so please provide it with all correspondence.
* Please note that calculated shipping is based on UPS.  We also reserve the right to ship for the same cost via FedEx or other carriers.
Packaging:
All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process.
Feedback:
We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.
Warranty:
No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR).  For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs.
Return Policy:
You can return the item for any reason
within three days
. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips.  We strongly encourage you to study these im
ages closely before you commit to purchasing the item.
Please call or email us if you have
any questions
about anything that you are uncertain about.
It is critical that you confirm that this item suites your needs within the
three day return policy
period.
Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following:
*Return Shipping and insurance of the item to our Store at the following address:
GP-Technical
246 Pooler Parkway Suite E
Pooler, GA 31322
(843)694-6535
*A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks.