-40%
High Gloss Pure White Gallon Kit Single Stage Acrylic Enamel Paint Kit

High Gloss Pure White Gallon Kit Single Stage Acrylic Enamel Paint Kit

$ 52.27

Availability: 100 in stock
  • Restocking Fee: No
  • Brand: BSS
  • Returns Accepted: Returns Accepted
  • Condition: New
  • Factory Color Code: 1354
  • Refund will be given as: Money Back
  • Paint Type: Acrylic Enamel
  • Items Included: Activator/Hardener
  • Item must be returned within: 14 Days
  • Bundled Supplies: Stir Sticks / Paint Strainers / Mixing Cup
  • Color: White
  • Return shipping will be paid by: Buyer
  • Primary Color: White
  • Manufacturer Color Name: Pure Bright White
  • Country/Region of Manufacture: United States
  • Bundled Kit Components: Med Temp Reducer / Super Gloss Wet Look Hardener
  • Manufacturer Part Number: 1354
  • Paint Volume: Gallon Kit
  • Kit Type: Single-Stage Paint Kit

    Description

    KIT INCLUDES A GALLON OF COLOR 1 QUART OF REDUCER AND 1 PINT OF WET LOOK HARDENER,STICK,MIXING CUP,STRAINERS
    MIX RATIO IS 8:2:1
    Classic Series Acrylic Enamel factory-packaged paint is available in 20 popular pre-mixed colors. This easy-touse single-stage topcoat provides excellent durability for a variety of applications including cars, trucks and commercial equipment.
    PREP STEPS:
    Prep surfaces by removing all traces of wax, grease, silicone, oil and other contaminants with a detergent wash, followed with a solvent-based cleaner. Abrade surface with 600-800 grit sandpaper to ensure proper adhesion. Re-clean with a final prep cleaner. Tack entire surface.
    MIXING DIRECTIONS:
    Thoroughly shake, then stir Classic Series Acrylic Enamel. To ensure color consistency when working with multiple gallons, it is always recommended to blend the contents of all gallons together prior to reduction. Mix with Acrylic Enamel Reducer 4:1 by volume (4 parts paint, 1 part reducer). Depending on temperature, air flow and other conditions, additional reduction may be required.. For improved durability, increased gloss and faster dry times, add one pint Wet Look Hardener for every gallon of paint. When using optional Acrylic Enamel Hardener, mix ratio becomes 8:2:1 (8 parts paint, 2 parts reducer, 1 part hardener).
    POT LIFE:
    Pot life of paint once mixed with hardener is approximately 2-3 hours at 70°F
    APPLICATION:
    Use an HVLP gun with a 1.2—1.4 mm tip and 8-10 psi at the cap. Refer to spray equipment manufacturer’s recommendations for further information. Apply 2-3 medium wet coats as necessary to achieve the desired coverage, allowing each coat to dry hand slick (approximately 20-30 minutes) before applying the next coat. A dry film thickness of 2 mils is recommended. Be sure to spray even, consistent coats with proper technique. For metallic and pearl colors, consistent application technique is critical to prevent mottling and other inconsistencies in the finish. Uneven coats resulting in wet/dry areas will create the appearance of striping or spotting. For colors with lower hiding ability, a consistent, solid-colored ground coat is recommended.
    DRY TIMES:
    Classis Series Acrylic Enamel will dry tack-free in one hour (two hours if applied without the optional hardener). Dry time may be more or less depending on temperature, air movement, film thickness and other factors. May be force dried for 30 minutes at 140°F after a 20-30 minute flash. Do not force dry if applied without optional hardener. Wait at least 24 hours to tape or otherwise handle. If applied without optional hardener, wait at least a week before taping on the surface.
    FREE SHIPPING TO THE LOWER 48 STATES
    NO P.O. BOXES