Aidetek silicone rubber wire 7in1 needle tipped alligator clips Test Lead T20258

Description

Aidetek silicone rubber wire 7 in 1 set needle tipped tip alligator clips mini-grabber
test leads for multimeter DMM tester TLP20258
1） silicone rubber wire test leads, 16A, IEC1010-031 CAT II: 1000V P3605-2
Silicone-insulated test leads are more flexible, more heat and burn resistant, more chemical and
solvent resistant, and less sensitive to environmental temperatures.
Ф3.6mm test lead
Test leads meet the RoHS and CE requirement
Ф2mm copper test tip with right angle ten plug and safety cap
Wire material: Silicon Rubber wire Ф3.6*65*0.10
IEC1010-031 CAT II: 1000V
Max rated current: AC 16A
Standard length: 850mm
high temperatures up to 200oC and lows down to -90°C
Good oil and solvent resistance, and good corona, and ozone and weathering resistance.
2) Two ( one red + one black) alligator clips with removable insulators
Whole Length: 5cm, 1.2cm The maximum size of the opening
3) Two plunger mini-hooks mini-grabber ( one red + one black) with 0.16 inch banana plug tip ,
Whole length: 60cm (23.58 inch)
4)  Two ( One red + one black) silicone rubber wire  lead extensions
,  Shrouded
banana plugs at both ends, Whole length: 50cm (19.68 inch) P2050
Rated Voltage: 300V
Material: Silicone rubber
Thickness: 0.60mm
Diameter: 2.2mm
Vol. Test ( AC. V. 60S): 2000V
Conductor resistance: 36.7 ( MAX)  ohm/Km
Insulator resistance: 1000 Mohm / m
Flame Test: Horizontal flame
5) A pair of sharp Stainless Steel Needle Tipped Tip Multimeter Probes Test Leads
600v 1a 4mm Socket，Whole Length: 129.5mm Needle length: 20.5mm，Match with the test
lead of Multimeter or Oscilloscope Advantage： Lengthened sharp and hard stainless steel needle
(Dia.1mm) can easily pierce the surface of cable but doesn't destroy it.It can be widely used about
the non-destructive cable test in auto,Telecom,Industry or test inside of the plug.
Available color：Red Black
Metal material：Brass、Stainless Steel
Insulator material：PA Rated voltage/current：CE CATII 600V /MAX. 1A Connect
method：4mm socket connectio
6）Two ( one red + one black)  modular 4 inch heavy duty test probe handles
Length: 10.5cm
Material: Insulator:PA
Body:Brass
Spring:Beryllium copper
Surface:Nickel plated
Rated voltage/current:
CATII 1000V/Max.32A, CE certificate
Feature
Safety test probe with 4mm socket connection. Spring-loaded tip
1 2 3 4 5 with the protective cap.
7)  AideTek TL5 rubber wire  banana jack Alligator clip test leads 20 cm red+black
4 mm Test lead of alligator clip (alligator clip) connected to the tip of banana jack 4mm;
Used as a substitute for a regular rod-shaped test lead, it will not easily come off even if a sudden
tension or shock is applied during the test;
Hold a socket that can insert 4 mm banana plug;
Total length 20 cm. One set of red black (1 red / 1 black).
Length: 20cm / 7.87″
Housing: ABS
Conductor: Nickel-plated brass
1500Vdc / 10A
Shipping:  USA orders will ship from USA, other orders will ship from China via post office 2-3 weeks with track #, thank you
eBay Cross Border Trade powered by ChannelEffect